Lawns mown. They took a bit over an hour, but should have taken less time. The starter cord broke once again. Thankfully this time I did not need to look for cord to replace it with unlike last time. This time I just needed to replace it and install it. This was easier said than done since the cord was actually slightly big, but it worked. Well, eventually. The first time I tried it the cord would not retract. So off it came again, but thankfully I did not need to re-thread the cord. Also, despite the appearance to the contrary, the ground was not all that damp. Things are fairly dry out there actually, particularly on the top.

I got the user interface implemented for the Benefon tracking system. You can now right click on some vehicles and say that you want to start tracking. It will ask you how many seconds between SMS position reports, and how many minutes you want it to be tracking, and it will send SMS messages to each of the phones. I have not yet implemented the ‘cancel tracking’ button… It will be the next one. In some ways I do not want to implement this feature since it would be a way for the system to stop the system working.

After doing the lawns I had a call asking about the firmware inside the Oz-Flarm… There were some reports of an issue, and I just needed to check that out… No issues found thankfully…