|
Yoke for Microsoft Flight Simulator
Back at the beginning of 1991 I had some time on my hands when I was doing some
industrial experience in a machine shop. I decided to build a YOKE for Flight
Simulator in this spare time out of materials commonly found in a machine shop.
The yoke works on two orthoginal axes - in/out and rotate. Movements in each
direction drive potentiometers. The design is not perfect, but it works. The welding
is quite poor, but dones not need to be good. Some lathe work was required, but mostly
for working on Nylon. With some work the lathe is optional.
The photos show all the details. I have never produced any plans, but I might attempt
this if I get some spare time.
____
Welcome to our Techical Site. If you are interested in an overview, then visit our
Marketing Site
Copyright © 1994-2005
Radioactive Networks ,
darryl@radio-active.net.au
This page was last updated 2005-11-15 17:18:31
This page was last compiled 2005-11-15 19:01:58
Question or Comment? Click
here
|
