Software     UI-View     WinAPRS     UI-Digi     Maps     APRS Spec

UI-View is available from http://www.ui-view.com/

UI-View is probably the premier APRS application today. The software is written by Roger Barker, G4IDE who is truley committed to APRS. The software is fantastic, and so is the support.

For details of mailing lists for UI-VIEW check out APRS Mailing Lists above.

UI-View was used during the Sydney Olympics to track helocopters and motorcycles with cameras. When UI-View did not have the exact capabilities required, roger added them

Registering UI-View in Australia

> Roger Barker will accept A$20 mailed to him directly to register the UI-VIEW software. The money cn be sent to

      Roger Barker, G4IDE
      79 South Parade
      Boston Lincs PE21 7PN
      England

Further details can be found on http://vk4go.com/dl.htm

UI-View Links
vk-rep.pos   X	VK Repeater positions file for UI-View
auspc.zip   X	Town Names and their relation to Postcodes
austowns.zip   X	Australian Town Names and their locations - CSV
VK Postcode Positions   X	Locations of all Australian Postcodes for UI-View
VK Callsign Database   X	Callsign Database that can be used with the next file
VK Callsign Database Server   X	With the previous file intergrates all VK callsigns into UI-View
Support Files
rep.txt   X	List of all REPEATER callsigns for Australia
sma.txt   X	Gets positions from SMA on all Repeaters in Australia

Andrew Rich [andrew.rich@bigpond.com]
Send these commands to UI-VIEW as a message

?APRSP - sends back a location beacon.
?APRSS - sends back the status text.
?APRSO - sends back your active objects.
?APRSD - sends back a list of stations that have been heard direct.
?APRST (or ?PING?) - sends back the route by which the query was received.
?APRSH  - sends back information on when  was last heard.
?VER? (not an APRS query, but some APRS software supports it) -
    sends back information on the software version in use.

With "Remote commands" enabled in UI-VIEW, you can send the follwoing
commands that are specific to UI-VIEW

QAS - causes your system (the Ui-VIEW station) to Query All Stations.
QWS - causes your system (the Ui-VIEW station)to Query WX Stations.
BCN - causes your system (the Ui-VIEW station)to send a beacon.
LGS (or LG1) - enables logging at (the Ui-VIEW station),
	using a log file named according to the date.
	(This command must come from the station
	callsign.)
LGX (or LG0) - disables logging at (the Ui-VIEW station). (This
	command must come from the station callsign.)
DX - causes your system (the Ui-VIEW station) to send an abbreviated
	best DX report.
!program - when sent to (the Ui-VIEW station) runs a program
	in the RCOMMAND directory

____
Welcome to our Techical Site. If you are interested in an overview, then visit our Marketing Site
Copyright © 1994-2006 Radioactive Networks , darryl@radio-active.net.au
This page was last updated 2005-09-01 20:13:38
This page was last compiled 2006-02-21 14:50:31
Question or Comment? Click here