Aprsd Information     AprsdDoc     perlFilter     Ports

aprsd TCP port functions for versions 2.1.3 July 6 2000

All port numbers are defined in /home/aprsd2/aprsd.conf. If a port is not defined there it is inactive. The exceptions are the ipwatchport and httpport ports which are enabled unless defined to zero in aprsd.conf.

Main Port #10151 (or System operator defined)**

• aprsd.conf key word: mainport
• Function: User access via various aprs clients to all data streams.
• Bidirectional
• echos:
  • Internet user data
  • Data from other IGATES and hubs
  • TNC data
  • Internal system status messages
  • UDP data
• Sends 30 minute* history of all data streams when user connects

Main Port-NH #10152 (or System operator defined)**

• aprsd.conf key word: mainport-nh
• Same as Main Port above but doesn't send 30 minute history when user connects.

Local Port #14579 (or System operator defined)

• aprsd.conf key word: localport
• Function: User access via various aprs clients to local TNC data only.
• Bidirectional
• echos:
  • TNC data
  • UDP data
  • Internal system status messages
• Sends 30 minute history of TNC data only

Raw TNC Port #14580 (or System operator defined)

• aprsd.conf key word: rawtncport
• Function: User access via various aprs clients to RAW local TNC data only.
• Bidirectional
• echos: TNC data
• No 30 minute history dump.

Link Port #1313 (or System operator defined)

• aprsd.conf key word: linkport
• Function: Other hubs such as APRServe connect here to get local TNC data and Internet user data.
• Bidirectional
• echos:
  • TNC data
  • Internet user data (from other ports)
  • UDP data
  • Internal system status messages
• Does NOT send 30 minute history
• Does NOT echo data from other IGATEs

Messsage Port #1314 (or System operator defined)

• aprsd.conf key word: msgport
• Function: Other hubs such as APRServe or aprsd connect here to get 3rd party station to station messages. All station to station messages from all data sources and a corresponding position report are available on this port. All other packets are filtered out. This is useful for clients that need to conserve Internet link bandwidth but want access to the global station to station message stream for Internet to RF messaging.
• Bidirectional
• echos:
  • 3rd party staton to station messages from all sources.
• Does NOT send 30 minute history.

UDP Port #1315 or defined by system operator

• aprsd.conf key word: udpport
• Function: Allows other programs such as Perl scripts to send short packets of data into the aprs stream or the TNC. Packets addressed to the TNC are directed to RF. All others go to the Internet. I use it to inject weather packets from a Perl script.
  The path data (up to and including the colon) are stripped off before the TNC gets it.
  eg:
  WA4DSY>TNC:This data goes to the TNC
  WA4DSY>APRS:This whole line goes to the Internet (no path stripping)
  
• Unidirectional (Input only)
• echos: nothing
• security: System operator defines IP addresses of trusted users. These will usually be a local host or subnet but could be any host.

HTTP Port #14501 or defined by system operator [New in 2.1.2]

• aprsd.conf keyword: httpport
• Note: You don't need to add this to your aprsd.conf file unless you want to change it to a port other than 14501. To disable it, set it to zero.
• Function: Defines the port which suppiles server status information in HTML format. This port is accessed with any web browser by entering the URL: http://wa4dsy.net:14501/ (replace "wa4dsy.net" with the domain name of the aprsd server you want ) To refresh the data click the RELOAD button on your browser.

IP Source monitor port #14502 or system operator defined. [New in 2.1.2]

• aprsd.conf keyword: ipwatchport
• Note: You don't need to add this to your aprsd.conf file unless you want to change it to a port other than 14502. To disable it, set it to zero.
• Function: Supplies all data streams without dup filtering with a special header prepended. The header contains the source IP address of the packet and the user login name, "IGATE" or "UDP". An example: !44.36.16.48:WA4DSY! Packets from other igates this server connected to will show the domain name instead of the IP address and the user will be "IGATE". Packets from the UDP port will have the IP address and the user field will be "UDP". Packets from the TNC will have "TNC" in the IP address field and "*" in the user field . Use telnet or nc optionally with grep to determine the source of packets.
  eg: telnet first.aprs.net 23 | grep '199.45.66.88'
  Will display only packets from IP address 199.45.66.88.

IGATE connection ports

REFORMATTING

Data from AEA TNCs is converted to TAPR format before being sent to clients.

Station to station messages of the 3rd party kind:

If it came from a logged on verified registered user.
and
The originator was not seen on the TNC RF data stream in the past 30 minutes.
and
The destination HAS been seen on the TNC RF data stream in the past 30 minutes and doesn't have "GATE*" in his path and has been repeated less than 3 times.

For each 3rd party messge delivered to RF the latest position report packet of the originating station will also be sent after reformating the path in 3rd party format. The program pulls the posit from the history list.

eg:
KE6DJZ>AP0917,KB6TLJ-5,RELAY,WIDE:=3415.99N/11844.34WyAPRS+SA
becomes:
}KE6DJZ>AP0917,TCPIP,WA4DSY*:=3415.99N/11844.34WyAPRS+SA
(assuming "MyCall" is WA4DSY )

During a series of messages the position packet will only be sent with a message every 10 minutes unless the station emits a new one.

This server will NOT igate a 3rd party reformatted message from RF to the Internet. This is strictly one way.

Users of unregisterd client programs can send their own station-to-station messages to other Internet users. These messages will not go out on the TNC RF channel and the path will be modified (TCPIP* is changed to TCPXX*) so other hubs will know not to send these messages out on their RF channels. Unregistered users cannot Igate packets other than their own. In other words, the ax25 source call in their packets must match their logon call.

eg; assume N0CLU is unregistered and attempts to send the following into the server.

N0CLU>APRS,TCPIP:>TESTING This will be converted to N0CLU>APRS,TCPXX*:>TESTING and gated to other users (but not to RF ever!)

However... W4ZZZ>APRS,TCPIP:>TESTING will be deleted and not sent anywhere.

Telnet users must provide a user name or call sign before any of their data can be relayed to the internet. They need to enter "user callsign pass -1" so the server will accept the data. The ax25 FROM call in packets they send must match the call sign they loggon with. If they provide a valid password full priviliges are granted since they used the keyboard to emulate a client program logon string. (Not that anyone would want to do this except for testing)

This server will also accept valid user/password combinations for the Linux system it is running on. These users must be in the aprs group. This group can be added by editing the /etc/group file. See the README for details. This program trusts other versions of itself and APRServe to flag the paths of data from unregistered Internet users with "TCPXX*". Station to station messages flagged this way will not be sent out on RF. The IGATE commands in the aprsd.conf file should specify a remote host port which is secure. For IGATES it must be a port which doesn't echo any Internet user data, only TNC data. Full function servers such as APRServe and this version (2.x.x) of aprsd will change TCPIP* to TCPXX* in the paths of unregistered users on all ports.

____
Welcome to our Techical Site. If you are interested in an overview, then visit our Marketing Site
Copyright © 1994-2006 Radioactive Networks , darryl@radio-active.net.au
This page was last updated 2007-02-06 08:11:08
This page was last compiled 2007-02-06 08:11:37
Question or Comment? Click here