{"id":24,"date":"2014-10-09T16:41:14","date_gmt":"2014-10-09T05:41:14","guid":{"rendered":"http:\/\/new.radio-active.net.au\/web3\/?page_id=24"},"modified":"2014-10-09T16:41:54","modified_gmt":"2014-10-09T05:41:54","slug":"kenwood-d7-protocol","status":"publish","type":"page","link":"http:\/\/www.radio-active.net.au\/web3\/Ham\/Kenwood\/D7","title":{"rendered":"Kenwood D7 Protocol"},"content":{"rendered":"

TH-D7 Protocol Specification<\/h2>\n

This document has been produced by examining the data going into and coming
\nout of the TH-D7 HT from Kenwood. There may be errors in this document –
\nso the authors of this document take no responsability for it’s accuracy or
\nfor any damages or losses as a result of using this document.<\/p>\n

Want to see in the TH-D7? Click HERE<\/a><\/p>\n

Serial Paramaters<\/p>\n

9600, 8, N, 1<\/p>\n

Return Values<\/p>\n\n\n\n\n\n\n
Return Value<\/td>\nDescription<\/td>\n<\/tr>\n
N<\/td>\nCommand Recognised but Invalid data entered.<\/td>\n<\/tr>\n
?<\/td>\nCommand Not Understood<\/td>\n<\/tr>\n
[command]<\/td>\nCommand Accepted<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Often entering a text command by itself or followed by the first paramater
\nwill return the present value of the setting.<\/p>\n

Generally paramters have<\/p>\n\n\n\n\n\n
<\/td>\n0<\/td>\n1<\/td>\n<\/tr>\n
State<\/td>\nOff<\/td>\nON<\/td>\n<\/tr>\n
Cannel (Band)<\/td>\nA<\/td>\nB<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

It may be able to tell if the unit attached has SkyCommand II by requesting
\nthe SkyCommand Call Sign. If the SkyCommand II is not available in the model,
\nan error should be returned.<\/p>\n

The most useful command is “AI 1”. It sets the TH-D7 to transmoit out the
\nserial port information about what the radio is doing. A ‘Y’ in the third
\ncolumn indicates that the radio will send this string out the serial port
\nwhen it is varied.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Command<\/td>\nDescription<\/td>\n<\/td>\n<\/tr>\n
ABC [0|1]<\/td>\nAutomatic Band Change [D-700]<\/td>\n<\/td>\n<\/tr>\n
ABLG<\/td>\nAPRS BLN Group<\/td>\n<\/td>\n<\/tr>\n
AMGG<\/td>\nAPRS MSG Group<\/td>\n<\/td>\n<\/tr>\n
AMR [0|1]<\/td>\nAPRS auto msg reply<\/td>\n<\/td>\n<\/tr>\n
AD [0|1]<\/td>\nAuto Display Dim [D-700]<\/td>\n<\/td>\n<\/tr>\n
AI [0|1]<\/td>\nTurns on output functions. Immediate functions output to the PC serial
\nport.<\/td>\n		<\/td>\n<\/tr>\n
AIP [0|1]<\/td>\nTurns of Advanced Intercept Point – 1=On<\/td>\n<\/td>\n<\/tr>\n
APO [0-2],n<\/td>\nAuto Power Off, 0=Off, 1 = 30 min, 2 = 60min APO *returns* two arguments,
\nthe first being the current APO setting and the second set to 1 if the unit
\nis about to be powered off. I.e. if you adjust it, you’d send\/receive “APO
\nn,0” where n is the setting, but if you let it sit for 30 minutes or whatever,
\nthe D7 will start beeping and send “APO n,1” where n is the current setting.
\nAPO returns 0 if APO is disabled. Returns APO1,0 when enabled.<\/td>\n		<\/td>\n<\/tr>\n
ARL nnnn<\/td>\nPos Limit (nnnn=km, 0000=off)<\/td>\n<\/td>\n<\/tr>\n
AMSG [01-16]<\/td>\nLets you view the corresponding APRS message with theresulting format<\/p>\n

AMSG a,KD6VYV-7,MESSAGE CONTENT HERE,b
\nformat of “a”<\/p>\n

a = number 1-5 then a= number of
\ntransmission left for message.<\/p>\n

a=* acknowledge received from
\nreceiving station (your message sent and received)<\/p>\n

a=M Mine – this makes me think
\nthat there might be B for bulletin, !,etc.<\/p>\n

format of “b”<\/p>\n

b is an unknown number and can
\nbe either one or three characters in length).<\/p>\n

AMSG [00] Lets you enter a new APRS message with the format:
\nAMSG 00,KD6VYV-7,MESSAGE CONTENT HERE<\/p>\n

If no content, then at least one space is required after the comma.<\/td>\n

<\/td>\n<\/tr>\n
ARO [0|1]<\/td>\nAuto Repeater Offset 0=Off 1 = 0n<\/td>\n<\/td>\n<\/tr>\n
ASC [A|B],[0|1]<\/td>\nAuto Simplex Check off and On?<\/td>\n<\/td>\n<\/tr>\n
BAL [0-4]<\/td>\nSet the Balance – Band A Only = 0, Band B only = 4, Even levels from
\nbands A and B = 2 [D-7 Only]<\/td>\n		<\/td>\n<\/tr>\n
BC [0|1]BC[0|1],[0|1]<\/td>\nChange Band to [A|B] Band. A= 0, B=1. [D700 two arguments. First is
\ncontrol band. Second is PTT]<\/td>\n		Y<\/td>\n<\/tr>\n
BCN [0|1]<\/td>\nBeacon mode [OFF|ON]<\/td>\n<\/td>\n<\/tr>\n
BEL [0|1],[0|1]<\/td>\nTurns band [A|B] Tone Alert [OFF|ON] [D-7 Only]<\/td>\n<\/td>\n<\/tr>\n
BEP [0-3]<\/td>\nBEEP. 0 = Off, 1 = Key, 2 = Key + New Data, 3 = All<\/td>\n<\/td>\n<\/tr>\n
BEPT [0-3]<\/td>\nBeep on APRS messages, 0 = off, 1 = mine, 2 = all
\nnew, 3 = all [D700]<\/td>\n		<\/td>\n<\/tr>\n
BUF[0|1],<\/p>\n

Frequency,
\nStep,<\/p>\n

Shift Direction,<\/p>\n

Reverse,<\/p>\n

Tone,<\/p>\n

CTCSS,<\/p>\n

DCS Enable,<\/p>\n

Tone Freq,<\/p>\n

DCS Tone,<\/p>\n

CTCSS Freq,<\/p>\n

Offset,<\/p>\n

Mode<\/td>\n

Set the Frequency on the Radio0 = Band A, 1 = Band B<\/p>\n

To the Hz, leading 0 to 99 GHz!!!<\/p>\n

0 = 5 HKz, 1=6.25, 2=10, 3=12.5, 4=15, 5=20, 6=25, 7=30, 8=50, 9=100
\nKHz<\/p>\n

0=none 1=+ 2=-) i.e. repeaters
\n,
\n1 = Reverse on<\/p>\n

1 = Tone On<\/p>\n

1 = CTCSS On<\/p>\n

1 = DCS On,<\/p>\n

1 = 67Hz, 3=71.5Hz …. 39=250.5 Hz<\/p>\n

Index<\/p>\n

1 = 67Hz, 3=71.5Hz …. 39=250.5 Hz
\nAs frequency Above
\n(i.e. 0.600\/5.000)<\/p>\n

0 = FM, 1 = AM<\/td>\n

<\/td>\n<\/tr>\n
BVOL [0-7]<\/td>\nBeep Volume 0 is off, 7 is loud [D-700]<\/td>\n<\/td>\n<\/tr>\n
BY [0|1],[0|1]<\/td>\nSquelch on band\u00a0 [A|B] is now [CLOSED|OPEN]<\/td>\n<\/td>\n<\/tr>\n
CIN<\/td>\nCopies current values (frequency, offset etc) to Call
\nChannel.<\/td>\n		<\/td>\n<\/tr>\n
CTD a,n<\/td>\nCTD Carrier Tone Detecta=band 0\/1
\nn;detected=1\/not detected=0<\/td>\n		<\/td>\n<\/tr>\n
CH [0|1]<\/td>\nChannel Display Mode OFF|On.<\/td>\n<\/td>\n<\/tr>\n
CP [0-3]<\/td>\nCOM port bit rate. 0 = 9600, 1 = 19200, 2 = 38400,
\n3 = 57600 [D-700]<\/td>\n		<\/td>\n<\/tr>\n
CKEY [0|1]<\/td>\nCALL key function. 0 = call, 1 = 1750 Hz tone.<\/td>\n<\/td>\n<\/tr>\n
CR [0|1],0<\/td>\nCall Channel Retrieve – Band [A|B]<\/td>\n<\/td>\n<\/tr>\n
CW<\/td>\nWrite Call channel Record… (as returned by CR)<\/td>\n<\/td>\n<\/tr>\n
CT [0|1]<\/td>\nCTCSS Enable<\/td>\nY<\/td>\n<\/tr>\n
CNT [01-16]<\/td>\nLCD Contrast – 08 is the default<\/td>\n<\/td>\n<\/tr>\n
CTN nn<\/td>\nCTCSS Tone – As abive<\/td>\nY<\/td>\n<\/tr>\n
DATP [0|1]<\/td>\nData Speed – 0 = 1200, 1 = 9600. [D-700]<\/td>\n<\/td>\n<\/tr>\n
DCSN<\/td>\nSet DCS Mode – codes map from 0010 = DCS code 023
\nthru 1040 = DCS code 754. [D-700]<\/td>\n		<\/td>\n<\/tr>\n
DIG [0|1]<\/td>\nAPRS digipeater, 1 = enable<\/td>\n<\/td>\n<\/tr>\n
DIM [0-4]<\/td>\nBacklight Control – 0 = off, 1 = bright, 4=dim [D-700]<\/td>\n<\/td>\n<\/tr>\n
DL [0|1]<\/td>\nDual Channel – 1 = Both A and B bands are used.<\/td>\nY<\/td>\n<\/tr>\n
DM cc,nn..nnn<\/td>\nDTMF Write. Writes Channel cc with nn..nnnnex. DM 01,12345 stores 123456 in DTMF memory 01<\/td>\n<\/td>\n<\/tr>\n
DMN cc, NAME<\/td>\nDTMF Channel Name. Names the Channelex. DMN 01,HELLO names DTMF memory 01 HELLO<\/td>\n<\/td>\n<\/tr>\n
DS [0|1]<\/td>\nDCD Sense – 0 = Data Band Only, 1 = Both Bands<\/td>\n<\/td>\n<\/tr>\n
DTB [0|1]<\/td>\nData Band A\/B<\/td>\n<\/td>\n<\/tr>\n
DTBA [0-3]<\/td>\nAPRS data band, 0 = A, 1 = B, 2 = A:TX\/B:RX, 3 = A:RX\/B:TX
\n[D700]<\/td>\n		<\/td>\n<\/tr>\n
DTM [0|1]<\/td>\nDTMF Monitor [D-700]<\/td>\n<\/td>\n<\/tr>\n
DTX [0-2]<\/td>\nAPRS Data TX mode (0=manual, 1=PTT, 2=auto)<\/td>\n<\/td>\n<\/tr>\n
DUP [0|1]<\/td>\nTurns radio to Full Duplex (1) or Half Duplex (0) [D7]<\/td>\n<\/td>\n<\/tr>\n
DW<\/td>\nMove Frequency Down<\/td>\n<\/td>\n<\/tr>\n
ELK [0|1]<\/td>\nTune Enable 0= Off, 1=On [D-7]<\/td>\n<\/td>\n<\/tr>\n
FL<\/td>\nComma Delimitered list of BAND extents<\/td>\n<\/td>\n<\/tr>\n
FQ<\/td>\nReturns present Frequency<\/td>\n<\/td>\n<\/tr>\n
FUNC [1-3]<\/td>\nFunction menu mode 1-3 [D700]<\/td>\n<\/td>\n<\/tr>\n
GU [0|1|2]<\/td>\nGPS Unit\u00a0\u00a0\u00a0 1=NMEA GPS 2=NMEA9600 [2 is D700 only]<\/td>\n<\/td>\n<\/tr>\n
ICO [0|1],i<\/td>\nSets the APRS Iconfor [0] 0=Kenwood W, 1=Runner, 2=House, 3=Tent, 4=Boat – Sail, 5=SlowScan,
\n6=Plane, 7=Speedboat, 8=Car, 9=bicycle, Are there more?<\/p>\n

for [1], i = Hex<\/td>\n

<\/td>\n<\/tr>\n
ID<\/td>\nReturns the Radio ID – ‘TH-D7’ or ‘TM-D700’<\/td>\n<\/td>\n<\/tr>\n
KILO [0|1]<\/td>\nAPRS 0 = Miles, 1 = Kilometers [D700]<\/td>\n<\/td>\n<\/tr>\n
LIST nn<\/td>\nLIST
\nnn,<call>,<pos>,<icon>,<pos_comment>,<mess_type>,<icon_ext>,<comment>,<data><\/tt><\/tt>Where:<\/tt><call>\u00a0\u00a0\u00a0\u00a0 callsign<\/tt><\/tt><\/p>\n

<pos> position data in the form nnnnnnccmmmmmmmdd<\/tt>
\n\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 where:<\/tt><\/p>\n


\nnn nn.nn\u00a0 latitude<\/tt><\/p>\n


\nmmm mm.mm\u00a0 longitude<\/tt><\/p>\n


\ncc 00 North, 01 South\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0<\/tt><\/p>\n


\ndd 00 East,\u00a0 01 West<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0<\/tt><\/p>\n

<icon>\u00a0\u00a0\u00a0\u00a0\u00a0 icon, 2 characters<\/tt><\/tt><\/p>\n

<pos_comment>\u00a0 1 character<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 ?\u00a0\u00a0\u00a0\u00a0 None<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 0\u00a0\u00a0\u00a0\u00a0 \"Off Duty\"<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 1\u00a0\u00a0\u00a0\u00a0 \"En Route\"<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 2\u00a0\u00a0\u00a0\u00a0 \"In Service\"<\/tt>
\n\u00a0\u00a0\u00a0\u00a0 3\u00a0\u00a0\u00a0\u00a0 \"Returning\"<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 4\u00a0\u00a0\u00a0\u00a0 \"Committed\"<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 5\u00a0\u00a0\u00a0\u00a0 \"Special\"<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 6\u00a0\u00a0\u00a0\u00a0 \"Priority\"<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 7\u00a0\u00a0\u00a0\u00a0 \"Emergency\"<\/tt><\/tt><\/p>\n

<icon_ext> 1 character<\/tt><\/tt><\/p>\n

<mess_type> Determins data, below<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 0\u00a0\u00a0\u00a0\u00a0 CSESPD<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 1\u00a0\u00a0\u00a0\u00a0 WEATHER<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 2\u00a0\u00a0\u00a0\u00a0 CSESPD<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 3\u00a0\u00a0\u00a0\u00a0 OBJECT<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 4\u00a0\u00a0\u00a0\u00a0 PHG<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 5\u00a0\u00a0\u00a0\u00a0 CSESPD<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0 6\u00a0\u00a0\u00a0\u00a0 CSESPD<\/tt><\/p>\n

\u00a0<\/tt><\/p>\n

<data>\u00a0\u00a0\u00a0\u00a0 12 characters<\/tt><\/p>\n

\u00a0 For:<\/tt><\/p>\n

\u00a0\u00a0\u00a0 CSESPD:\u00a0\u00a0\u00a0\u00a0 cccsss\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0<\/tt><\/p>\n

where ccc is course and sss is speed<\/p>\n

\u00a0\u00a0\u00a0 WEATHER:\u00a0\u00a0\u00a0 dddssstttrrr
\nwhere ddd is wind direction, sss is wind speed<\/tt><\/p>\n


\nttt is temperature and rr.r is rainfall<\/tt><\/p>\n

\u00a0\u00a0\u00a0 OBJECT:\u00a0\u00a0\u00a0\u00a0 fffffff
\nf... = \"from\" field<\/tt><\/p>\n

\u00a0\u00a0\u00a0 PHG:
\nphgd\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 where: p
\n= POWER, h = HEIGHT, g = GAIN, d = DIR<\/tt><\/tt><\/p>\n

\u00a0 DIGITS\u00a0\u00a0 0\u00a0 1\u00a0 2\u00a0\u00a0 3
\n4\u00a0\u00a0 5\u00a0\u00a0 6\u00a0\u00a0\u00a0 7\u00a0\u00a0\u00a0 8\u00a0\u00a0\u00a0<\/tt><\/p>\n

9\u00a0 as used in the Pwr field<\/p>\n

\u00a0 -------------------------------------------------------------------------<\/tt><\/p>\n

\u00a0 POWER\u00a0\u00a0\u00a0 0, 1, 4,\u00a0 9, 16, 25, 36,\u00a0<\/tt><\/p>\n

49,\u00a0 64,\u00a0 81\u00a0 watts\u00a0 SQR(P)<\/p>\n

\u00a0 HEIGHT\u00a0 10,20,40, 80,160,320,640,1280,2560,5120\u00a0<\/tt><\/p>\n

feet\u00a0\u00a0 LOG2(H\/10)<\/p>\n

\u00a0 GAIN\u00a0\u00a0\u00a0\u00a0 0, 1, 2,\u00a0 3,\u00a0 4,
\n5,\u00a0 6,\u00a0\u00a0 7,\u00a0\u00a0 8,\u00a0\u00a0 9\u00a0 dB<\/tt><\/p>\n

\u00a0 DIR\u00a0\u00a0\u00a0\u00a0\u00a0 0,45,90,135,180,225,270,
\n315, 360,\u00a0\u00a0 .\u00a0 deg\u00a0\u00a0\u00a0 D\/45\u00a0 This offsets<\/tt><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0<\/tt><\/p>\n

*
\nthe range circle in the<\/p>\n


\n* 0 means
\nOMNI
\nindicated direction<\/tt><\/td>\n

<\/td>\n<\/tr>\n
LK [0|1]<\/td>\nRadio Lock (1 = Locked)<\/td>\n<\/td>\n<\/tr>\n
LMP [0|1]<\/td>\nRadio Lamp ( 0 = OFF) [D7]<\/td>\n<\/td>\n<\/tr>\n
MAC [0-7]<\/td>\nSSTV My Call Color<\/td>\n<\/td>\n<\/tr>\n
MC [0|1],n<\/td>\nSwitch to memory channel on band\u00a0 [A|B], n=channel number<\/td>\n<\/td>\n<\/tr>\n
MCNT [0|1]<\/td>\nMic Control 1=Enable [D700]<\/td>\n<\/td>\n<\/tr>\n
MCL [0|1],[0|1<\/td>\nLock memory channel [A|B],[UNLOCK|LOCK]<\/td>\n<\/td>\n<\/tr>\n
MD [0|1]<\/td>\nSet [FM|AM] on the 118 MHz Sub Band<\/td>\n<\/td>\n<\/tr>\n
MES HELLO<\/td>\nPower On Message – Message is up to 8 Characters<\/td>\n<\/td>\n<\/tr>\n
MIN 0,0<\/td>\nCopies the currently displayed frequency and other settings into channel
\n32. MIN copies current VFO settings into current memory (like F, M.IN)<\/td>\n		<\/td>\n<\/tr>\n
MON [0|1]<\/td>\nTurns OFF|ON monitoring (Squelch)<\/td>\n<\/td>\n<\/tr>\n
MNA [0],nnn,Name<\/td>\nNames a memory. nnn of form 015 or L6. Name = max 8 characters<\/td>\n<\/td>\n<\/tr>\n
MNF [0|1]<\/td>\nChange between Name and frequency display on memories.<\/td>\n<\/td>\n<\/tr>\n
MP numbersMP x,numbers<\/td>\nMy Position1234560N12345670W<\/p>\n

N 0=North, 1=South\u00a0\u00a0 W 0=East 1=West<\/p>\n

North\/South = 12 deg 34.56 minutes
\nEast\/West = 123 deg 45.67 minutes<\/p>\n

D700 allows you to have multple “my position” stored (1-5):<\/p>\n

MP 1,33411001151070710<\/td>\n

<\/td>\n<\/tr>\n
MPNA n,label<\/td>\nlabel a “my position” memory. [D700]<\/td>\n<\/td>\n<\/tr>\n
MR [0],[0],nnn<\/td>\nReads memory nnn. nnn may be in the form 018, or L7Returns a MR string of the same form of BUF above, or form below.<\/p>\n

The absolute last parameter is a 0\/1,\u00a0\u00a0 1 being memory lockoutThe second parameter is used to store a split frequency.\u00a0 For<\/p>\n

example, if you store a frequency of 145.00 rcv, 145.30 xmt in<\/p>\n

channel 20, you get the following:<\/p>\n

MR 0,0,020,00145000000,0,0,0,0,0,,09,,09,,0,0<\/p>\n

MR 0,1,020,00145300000,0<\/p>\n

MR 0,0,nnn output from radio is:<\/p>\n

first three fields from input,<\/p>\n

freq,<\/p>\n

step,<\/p>\n

offset direction<\/p>\n

reverse,<\/p>\n

tone,<\/p>\n

ctcss,<\/p>\n

DCS on,<\/p>\n

tone freq,<\/p>\n

nnnn = dcs number, 0010 = 023 thru 1040 = 754<\/p>\n

ctcss freq,<\/p>\n

offset,<\/p>\n

mode,<\/p>\n

scan locked<\/p>\n

MR 0,1,nnn output is:<\/p>\n

first three fields from inout,<\/p>\n

freq,<\/p>\n

step (why?)<\/td>\n

<\/td>\n<\/tr>\n
MSH<\/td>\nCopy Memory to VFO – Same as F-VFO<\/td>\n<\/td>\n<\/tr>\n
MW0,<\/p>\n

nnn,<\/p>\n

Frequency<\/p>\n

Step,
\nShift,<\/p>\n

Reverse,<\/p>\n

Tone,<\/p>\n

CTCSS,<\/p>\n

DCS Enabled<\/p>\n

Tone Freq,<\/p>\n

DCS Tone<\/p>\n

CTCSS Freq,<\/p>\n

Offset,<\/p>\n

Mode,<\/p>\n

0<\/td>\n

MW\u00a0\u00a0 Memory Write… Needs a lot more workThis essentially mirrors MR. nnn is the Channel for the memory<\/td>\n<\/td>\n<\/tr>\n
MUTE [0|1]<\/td>\nMute other side on PTT[D-700]<\/td>\n<\/td>\n<\/tr>\n
MYC VK2TDS<\/td>\nSets the APRS CALLSIGN<\/td>\n<\/td>\n<\/tr>\n
NSFT [0|1]<\/td>\nBeat Shift – [OFF|ON]; [NORMAL|UPPER] [D7]<\/td>\n<\/td>\n<\/tr>\n
OS nnnn<\/td>\nRepeater Offset in Hz – 9 Digits 0 Padded<\/td>\n<\/td>\n<\/tr>\n
PAMB n<\/td>\nsets digits of ambiguity reported GPS position.<\/td>\n<\/td>\n<\/tr>\n
PC<\/td>\nPower ControlPC 0,0 ‘band A High power
\nPC 0,1 ‘incorrect command no function<\/p>\n

PC 0,2 ‘band A Low power<\/p>\n

PC 0,3 ‘band A EL power<\/p>\n

PC 1,0 ‘band B High power<\/p>\n

On D700 First field is band, second is power with<\/p>\n

0 = high, 1 = med, 2 = low<\/td>\n

<\/td>\n<\/tr>\n
PF x,yy<\/td>\nPF x,yy – mic programmable function keys, x = key
\n(1-4), yy = function00 = Power switch\u00a0\u00a0\u00a0\u00a0\u00a0 13 =
\nRev26 = Visual<\/p>\n

01 = A\/B
\n14 = Low
\n27 = Dim<\/p>\n

02 = Monitor
\n15 = Mute
\n28 = Sub-Band Sel<\/p>\n

03 = Enter
\n16 = Ctrl
\n29 = DX<\/p>\n

04 = Voice
\n17 = PM.In
\n30 = TNC<\/p>\n

05 = 1750 Hz tone\u00a0\u00a0\u00a0\u00a0\u00a0 18 =
\nA.B.C<\/p>\n

31 = List<\/p>\n

06 = PM
\n19 = M>V
\n32 = P.Mon<\/p>\n

07 = Menu
\n20 = M.In<\/p>\n

33 = BCon<\/p>\n

08 = VFO
\n21 = C.In
\n34 = Msg<\/p>\n

09 = MR
\n22 = Lock
\n35 = Pos<\/p>\n

10 =
\nCALL
\n23 =
\nT.Sel
\n11 =
\nMHz
\n24 =
\nShift<\/p>\n

12 = Tone
\n25 = Step [D700]<\/td>\n

<\/td>\n<\/tr>\n
PIM n<\/td>\nWrites current “Programmable Memory” settings to memory
\nN [D700]<\/td>\n		<\/td>\n<\/tr>\n
PKSA [0|1]<\/td>\nAPRS packet speed, 0 = 1200, 1 = 9600<\/td>\n<\/td>\n<\/tr>\n
PM n<\/td>\nselects “Programmable Memory” (aren’t they all). [D700]<\/td>\n<\/td>\n<\/tr>\n
PMM n<\/td>\nAuto “Programmable Memory” store, 0 = enable, 1 =
\ndisable! [D700]<\/td>\n		<\/td>\n<\/tr>\n
POSC n<\/td>\nPosition Comment – 0=Off Duty, 1=Enroute, 2=In Service, 3=Returning,
\n4=Committed, 5=Special, 6=Priority, 7=Emergency<\/td>\n		<\/td>\n<\/tr>\n
PP path<\/td>\nAPRS Packet Path<\/td>\n<\/td>\n<\/tr>\n
PT [0-6]<\/td>\nTransmit Speed Pause of DTMF (100,200,500,750,1000,1500,2000 mSec)<\/td>\n<\/td>\n<\/tr>\n
PV [1-6],f1,f2<\/td>\nSet or return the VCO1=Air Band, 2 = VHF A, 3 = VHF B, 6 = UHF<\/p>\n

f1, f2 = MHz only 5 digits 0 leading<\/p>\n

f1 = lower VCO freq. f2 = Higher VCO Freq<\/p>\n

PV first arg on D700 is 1-9 (weird pattern)<\/p>\n

band<\/p>\n

PV 1,00118,00135A (AM)<\/p>\n

PV 2,00136,00199
\nA<\/p>\n

PV 3,00136,00174
\nB<\/p>\n

PV 4,00200,00299
\nA<\/p>\n

PV 5,00300,00399
\nB<\/p>\n

PV 6,00300,00399
\nA<\/p>\n

PV 7,00400,00523
\nB<\/p>\n

PV 8,00400,00469<\/p>\n

A<\/p>\n

PV 9,00800,01299
\nB<\/td>\n

<\/td>\n<\/tr>\n
RBN [1|2|3|6]<\/td>\nSets the VFO mode for the selected band.\u00a0 If you’re onband A, 1 and 2 are valid settings and will switch between AIR and VHF_A.<\/p>\n

If you’re on band B, 3 and 6 are valid settings for VHF_B and UHF<\/td>\n

<\/td>\n<\/tr>\n
RC [0|1]<\/td>\nremote control, 1 = enable [D700]<\/td>\n<\/td>\n<\/tr>\n
RCA [0|1]<\/td>\nremote control answer back, 1 = enable [D700]<\/td>\n<\/td>\n<\/tr>\n
RCC nnn<\/td>\nremote control code, default 000 [D700]<\/td>\n<\/td>\n<\/tr>\n
REP [0-2]<\/td>\nrepeater, 0 = off, 1 = locked band, 2 = cross band
\n[D700]<\/td>\n		<\/td>\n<\/tr>\n
REPH [0|1]<\/td>\nRepeater Hold [D700]<\/td>\n<\/td>\n<\/tr>\n
REV [0|1]<\/td>\nSets the REVERSE mode – 1 = On<\/td>\n<\/td>\n<\/tr>\n
RSV text<\/td>\nAn RSV message\u00a0 – usually Signal report<\/td>\n<\/td>\n<\/tr>\n
RSC [0-7]<\/td>\nRSV Text Color<\/td>\n<\/td>\n<\/tr>\n
RX<\/td>\nStop transmitting and go into recieve mode, or the radio has stopped
\ntransmitting<\/td>\n		<\/td>\n<\/tr>\n
SC [0|1]<\/td>\nStop\/Start Scanning<\/td>\n<\/td>\n<\/tr>\n
SCR [0-2]<\/td>\nScan Resume – 0=Time, 1 = Carrier, 2 = Seek<\/td>\n<\/td>\n<\/tr>\n
SCC callsign<\/td>\nSky Command Callsign<\/td>\n<\/td>\n<\/tr>\n
SCT callsign<\/td>\nSky Command To Callsign<\/td>\n<\/td>\n<\/tr>\n
SFT n<\/td>\nRepeater Shift. 0=None, 1=minue, 2=Plus<\/td>\n<\/td>\n<\/tr>\n
SKTN nn<\/td>\nSky Command Access Tone – As CTCSS<\/td>\n<\/td>\n<\/tr>\n
SHT n<\/td>\nsquelch hang time, 0 = off, 1 = 125 ms, 2 = 250 ms,
\n3 = 500 ms [D700]<\/td>\n		<\/td>\n<\/tr>\n
SM [0|1],nn<\/td>\nRecieved signal strength on band [A|B] – 05 is the highest I have seen<\/td>\n<\/td>\n<\/tr>\n
SMSG text<\/td>\nSSTV Message<\/td>\n<\/td>\n<\/tr>\n
SMY mycall<\/td>\nSkyCommand or SSTV (check) callsign<\/td>\n<\/td>\n<\/tr>\n
SMC [0-7]<\/td>\nSSTV Message Color0=Black, 1=Blue, 2=Red, 3=Magenta, 4=Green, 5=Cyan, 6=Yellow<\/td>\n<\/td>\n<\/tr>\n
SQ [0|1],[00-1F]<\/td>\nSet the Squelch setting for the [A|B] band. The valid range is 00-05
\n(00=open)D700 range is 00-1F<\/td>\n		<\/td>\n<\/tr>\n
SSEL n<\/td>\nset speaker mode 1-2 [D700]<\/td>\n<\/td>\n<\/tr>\n
SSL b,l<\/td>\nS-meter squelch level, b = band, l = bars to open
\n[D700]<\/td>\n		<\/td>\n<\/tr>\n
SSQ b,n<\/td>\nset S-meter squelch, b = band, n = 1 enable [D700]<\/td>\n<\/td>\n<\/tr>\n
ST n<\/td>\nSet Step Size0 = 5 HKz, 1=6.25, 2=10, 3=12.5, 4=15,<\/p>\n

5=20, 6=25, 7=30, 8=50, 9=100 KHz<\/td>\n

<\/td>\n<\/tr>\n
STAT text<\/td>\nSets the APRS Status Text<\/td>\n<\/td>\n<\/tr>\n
STC call,n<\/td>\nSSTV Superimpose Call – n=???<\/td>\n<\/td>\n<\/tr>\n
STS<\/td>\nSSTV Transmit Mode – VC involved?<\/td>\n<\/td>\n<\/tr>\n
STP<\/td>\nStop Scanning – No RETURN !!! This may be a side effect and really be
\nrelated to the SSTV VC.<\/td>\n		<\/td>\n<\/tr>\n
STXR n<\/td>\nStatus TX Rate, 0 = off, 1-8. [D700]<\/td>\n<\/td>\n<\/tr>\n
SV [0-9]<\/td>\nBattery Save, 0=Off, 1=0.2Sec 2=0.4, 3=0.6, 4=0.8, 5=1.0, 6=2, 7=3,
\n8=4, 9=5 [D7]<\/td>\n		<\/td>\n<\/tr>\n
TC [0|1]<\/td>\nTurns FULL TNC ON\/OFF – TC 0 turns full TNC on. TC 1 turns TNC off in
\nTNC comamnd mode. Returns TS 1 !!!! Note the wrong return value.[D7]<\/td>\n		<\/td>\n<\/tr>\n
TNC [0|1]<\/td>\nTurns the TNC [OFF|ON]. Turning it on is only for APRS mode.D700 1 = APRS, 2 = Packet<\/td>\n<\/td>\n<\/tr>\n
TO [0|1]<\/td>\nPl Tone Enable<\/td>\n<\/td>\n<\/tr>\n
TOT<\/td>\nPTT timeout, 0 = 3 minutes, 1 = 5 min, 2 = 10 min
\n[D700]<\/td>\n		<\/td>\n<\/tr>\n
TEMP [0|1]<\/td>\nAPRS 0 = degrees F, 1 = degrees C<\/td>\n<\/td>\n<\/tr>\n
TN nn<\/td>\nPL Tone – As above<\/td>\n<\/td>\n<\/tr>\n
TSP [0|1]<\/td>\nDTMF Transmission Speed – 0 = Fast, 1 = Slow<\/td>\n<\/td>\n<\/tr>\n
TT [0|1]<\/td>\nTurn OFF\/On 1750 Mhz tone (D7E)<\/td>\n<\/td>\n<\/tr>\n
TX [0|1]<\/td>\nStart transmitting on the [A|B] band.<\/td>\n<\/td>\n<\/tr>\n
TXH [0|1]<\/td>\nTurns TXHold [OFF|ON]<\/td>\n<\/td>\n<\/tr>\n
TXI [0-7]<\/td>\nAPRS TX interval(0=0.5,1=1,2=2,3=3,4=5,5=10,6=20,7=30)<\/td>\n<\/td>\n<\/tr>\n
TXN<\/td>\nTransmit Narrow (TH-D7E)<\/td>\n<\/td>\n<\/tr>\n
TXS [0|1]<\/td>\nTX Inhibit 0=Off, 1=On [D7]<\/td>\n<\/td>\n<\/tr>\n
TDY<\/td>\nit’s thought these are related to the diode matrix
\n– for example,TH-G71 radios with the extended receive mod report different values.<\/p>\n

Handy if you could set them via the serial port!<\/td>\n

<\/td>\n<\/tr>\n
UIDIG nnn<\/td>\nUIDIGI path [D700]<\/td>\n<\/td>\n<\/tr>\n
UNIT [0|1]<\/td>\nAPRS Display Unit0 = Miles\/F, 1=Km and Celcius (1 Should be the default \ud83d\ude42 [D7]<\/td>\n<\/td>\n<\/tr>\n
UPR string<\/td>\nUnproto String – APK001 = Default [APK101 for D700]<\/td>\n<\/td>\n<\/tr>\n
UP<\/td>\nUP Moves the Memory Channel up (similar to DW) – Similar to DW<\/td>\n<\/td>\n<\/tr>\n
VCS [0|1]<\/td>\nSSTV VC Shutter 1=on<\/td>\n<\/td>\n<\/tr>\n
VMC [0|1]|[0-3]<\/td>\nMode of band\u00a0 [A|B] 0=VFO, 2=Memory, 3=call<\/td>\n<\/td>\n<\/tr>\n
VSC [0|1]<\/td>\nVisual Scan [D700]<\/td>\n<\/td>\n<\/tr>\n
VSL xxx,y<\/td>\nVisual scan output, I guess XXX is the “channel”number and “y” is the signal strength (ranges between 0 and 7 like<\/p>\n

the main signal strength) [D700]<\/td>\n

<\/td>\n<\/tr>\n
VSM n<\/td>\nvisual scan mode, 1 = 31 channel, 2 = 61 ch, 3 = 91
\nch, 4 = \u00a0 181 ch. [D700]<\/td>\n		<\/td>\n<\/tr>\n
VW<\/td>\nVFO Write ???<\/td>\n<\/td>\n<\/tr>\n
WAY n<\/td>\nwaypoint reporting format -0 = off
\n1 = 6 digits NMEA<\/p>\n

2 = 7 digits NMEA<\/p>\n

3 = 8 digits NMEA<\/p>\n

4 = 9 digits NMEA<\/p>\n

5 = 6 digits Magellan<\/p>\n

6 = DGPS<\/td>\n

<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

UNKNOWN COMMANDS<\/h2>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Command<\/td>\nComment<\/td>\n<\/tr>\n
GC<\/td>\n<\/td>\n<\/tr>\n
GM<\/td>\n<\/td>\n<\/tr>\n
SR<\/td>\n<\/td>\n<\/tr>\n
TH<\/td>\n<\/td>\n<\/tr>\n
LAN<\/td>\n<\/td>\n<\/tr>\n
NMSG<\/td>\n<\/td>\n<\/tr>\n
OPTH<\/td>\nNo Return – VC?<\/td>\n<\/tr>\n
STM<\/td>\nNo Return – VC?<\/td>\n<\/tr>\n
STR<\/td>\nNo Return – VC?<\/td>\n<\/tr>\n
STS<\/td>\nNo Return – VC?<\/td>\n<\/tr>\n
STT<\/td>\nNo Return – VC<\/td>\n<\/tr>\n
TXN<\/td>\n<\/td>\n<\/tr>\n
TYD<\/td>\n<\/td>\n<\/tr>\n
ULC 0,0<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Format of the D7 Kenwood File<\/h2>\n

 <\/p>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/tr>\n
COMMENT<\/td>\nComents?<\/td>\n<\/tr>\n
MEMORY<\/td>\nContents of radio memories<\/td>\n<\/tr>\n
CALL<\/td>\nContents of Call Channels<\/td>\n<\/tr>\n
VCO<\/td>\nContents of the VCO’s<\/td>\n<\/tr>\n
DTMF<\/td>\n???<\/td>\n<\/tr>\n
RADIO MENU<\/td>\n<\/td>\n<\/tr>\n
APRS MENU<\/td>\nAPRS Setting<\/td>\n<\/tr>\n
SSTV MENU<\/td>\nSlow Scan TV Settings<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

MEMORY<\/p>\n

TAB Delimitered<\/p>\n

CHANNEL|FREQ|STEPflag|SHIFTflag|REV|TONEflag|CTSSflag<\/p>\n

|Blank|TONEcode|Blank|CTSScode|Offset|LOCKflag|FM\/Amflag|Blank|Blank|Blank|NAME<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/tr>\n
1<\/td>\nMemory Number – 3 Digits<\/td>\n<\/tr>\n
2<\/td>\nFrequency – 9 Digits<\/td>\n<\/tr>\n
3<\/td>\nVCO Number (1=118 MHz, 2=VHF, 3=SubVHF, 6=UHF<\/td>\n<\/tr>\n
4<\/td>\nFrequency Step (0 = 5 HKz, 1=6.25, 2=10, 3=12.5, 4=15,5=20, 6=25, 7=30, 8=50, 9=100 KHz)<\/td>\n<\/tr>\n
5<\/td>\nReverse On<\/td>\n<\/tr>\n
6<\/td>\nTone On (1=On)<\/td>\n<\/tr>\n
7<\/td>\nCTCSS On (1=On)<\/td>\n<\/tr>\n
8<\/td>\n<\/td>\n<\/tr>\n
9<\/td>\nTone Frequency<\/td>\n<\/tr>\n
10<\/td>\n<\/td>\n<\/tr>\n
11<\/td>\nCTCSS Frequency<\/td>\n<\/tr>\n
12<\/td>\nRepeater Offset – 9 Digits<\/td>\n<\/tr>\n
13<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

24-December-1999<\/p>\n

This document has been produced by Darryl Smith, VK2TDS, and David Nesting
\nWL7RO. Thanks also to Andre PE1RDW, Anthony Parise WA3HRL, Andrea Borgia and
\nGlenn Cummings KG7IL. Please email comments and corrections to Darryl Smith
\nVK2TDS. Thanks to Andrew McNamara for D700 updates. Thanks also to Willy Robison KC0JFQ for updates.<\/p>\n

For a PERL module that can be used to operate the TH-D7 click
\nHERE<\/a><\/p>\n

.<\/p>\n

The following table is from Jim Gill<\/a><\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
TNC\/Serial Port
\n<\/span>is in<\/p>\n

THIS MODE<\/th>\n

TO GO TO<\/span><\/span>THIS MODE<\/th>\nSEND THIS<\/span><\/span>IN<\/p>\n

UPPERCASE<\/th>\n

Is there a delay<\/span><\/span>for the TNC<\/p>\n

to re-initialize<\/th>\n<\/tr>\n

OFF<\/span><\/td>\nAPRS<\/span><\/td>\nTNC 1<\/span><\/td>\nYES<\/span><\/td>\n<\/tr>\n
OFF<\/span><\/td>\nPACKET<\/span><\/td>\nTNC 2<\/span>
\nthen TC 0<\/span><\/span><\/td>\n		YES<\/span><\/td>\n<\/tr>\n
OFF<\/span><\/td>\nRC<\/span><\/td>\n(not necessary)<\/span>*<\/span><\/span><\/b><\/td>\n<\/td>\n<\/tr>\n
APRS<\/span><\/td>\nOFF<\/span><\/td>\nTNC 0<\/span><\/td>\n<\/td>\n<\/tr>\n
APRS<\/span><\/td>\nRC<\/span><\/td>\n(not necessary)<\/span>*<\/span><\/span><\/b><\/td>\n<\/td>\n<\/tr>\n
APRS<\/span><\/td>\nPACKET<\/span><\/td>\nTNC 2<\/span>
\nthen TC 0<\/span><\/span><\/td>\n		YES<\/span><\/td>\n<\/tr>\n
RC<\/span><\/td>\nOFF<\/span><\/td>\nTNC 0<\/span><\/td>\n<\/td>\n<\/tr>\n
RC<\/span><\/td>\nAPRS<\/span><\/td>\nTNC 1<\/span><\/td>\nYES<\/span><\/td>\n<\/tr>\n
RC<\/span><\/td>\nPACKET<\/span><\/td>\nTC 0<\/span><\/td>\nNO<\/span><\/td>\n<\/tr>\n
PACKET <\/span>*<\/span><\/b><\/span><\/td>\nOFF<\/span><\/td>\nTC 1<\/span> then
\n TNC 0<\/span><\/span><\/td>\n		<\/td>\n<\/tr>\n
PACKET <\/span>*<\/span><\/b><\/span><\/td>\nRC<\/span><\/td>\nTC 1<\/span><\/td>\nNO<\/span><\/td>\n<\/tr>\n
PACKET <\/span>*<\/span><\/b><\/span><\/td>\nAPRS<\/span><\/td>\nTC 1<\/span> then
\n TNC 1<\/span><\/span><\/td>\n		YES<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

*<\/span><\/span><\/b>
\nDon’t forget to send a Ctrl-C (alt-3 on keypad, hex $03, etc) to get out of
\nconverse mode on the TNC if necessary!<\/span><\/b><\/p>\n

*<\/span> You
\ncan enter any Radio Control (RC) commands while in the OFF or APRS modes.<\/span><\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

TH-D7 Protocol Specification This document has been produced by examining the data going into and coming out of the TH-D7 HT from Kenwood. There may be errors in this document – so the authors of this document take no responsability …<\/p>\n

Kenwood D7 Protocol<\/span> Read More »<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"parent":21,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"jetpack_post_was_ever_published":false,"footnotes":""},"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/P5cfmK-o","_links":{"self":[{"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/pages\/24"}],"collection":[{"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/comments?post=24"}],"version-history":[{"count":2,"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/pages\/24\/revisions"}],"predecessor-version":[{"id":26,"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/pages\/24\/revisions\/26"}],"up":[{"embeddable":true,"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/pages\/21"}],"wp:attachment":[{"href":"http:\/\/www.radio-active.net.au\/web3\/wp-json\/wp\/v2\/media?parent=24"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}